MLC20C-PS2 Sensor DIM LED Driver
For more details, pls refer to as follows:
MLC20C-PS2 MLC40C-PS MLC60C-PS Spec.doc
【Product Feature】
1. Linear metal housing isolated dimmable LED drive, flicker-free, PWM dimming.
2. Multi current optional via DIPs, with PWM control interface.
3. Match different microwave sensors or wireless intelligent modules.
4. Meet CE/TUV/CCC/SAA certificates and ERP requirements.
【Parameter】
| Input | Input current | ≤0.13A @230VAC full load |
| Rated voltage | 220-240V AC 50Hz/60Hz |
| Stand-by power | ≤0.5W |
| Power factor | ≥0.95(@230V Max load) |
| Working efficiency | ≥83% (@230V Max load) |
| THD | ≤20%(@230V Max load) |
| Leak current | <0.5mA/240V |
| Inrush current | <15A(100us half-current)@230V AC |
| Output | Working model | CC |
| Type of load | LED |
| Flick | ≤2% |
| Constant current accuracy | Constant current accuracy ±5% |
| No-load output voltage | 60VDC Max |
| Full load power | 20W Max |
| Load current | 300mA/350mA :9-42V 400mA/450mA/450mA:9-42V 500mA:9-40V 550mA:9-36V 600mA:9-32V 650mA:9-30V 700mA:9-28V |
| Load output voltage range | 9-42V DC |
| Interface | PWM control interface | PWM (3.3V 5V) |
| Connection mode of interface end | 3pin terminal |
| Auxiliary driver parameters | Voltage | 8.5±1V |
| Current | 25mA max |
| Abnormality Protection Requirements | Input overvoltage protection | Yes, self-recovery |
| Input no-load protection | Yes, self-recovery |
| Input short-circuit protection | Yes, self-recovery |
| Environmental requirements | Operating temperature | -25…+50℃ |
| Maximum shell temperature(Tc) | 85℃ |
| Storage temperature/humidity | -40℃…+80℃ Humidity: ≤85% (non-condensation) |
| Certificate Standards | Safety standards(LVD) | EN61347-1, EN61347-2-13 |
| EMC standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3 |
| Surge | L N:1KV (different mode) L N to ground 2KV (common mode) |
| Withstand voltage | Primary to secondary: 3000VAC; Primary to ground :1500VAC |
| Environmental requirement | RoHS |
| Certificate | CE SAA |
| Wiring method | Press terminal, wire diameter:0.5-1.0mm2 |
| IP Rating | IP20 |
| Protection class | Class I |
| Installation | Built-in |
| Package | PE bag clapboard, carton(K=A) |
| Installation size | 195mm*30mm*20.5mm |
| Net weight | 113.5±3g |
| Lifetime | 5 years warranty@Ta 230V full load |
【Product characteristic Test】
【Lifetime Curve】
【Dimension (mm)】
【 Wiring 】
【 Structure 】
【DIP Switch Setting 】
MLC20C-PS2 current gear settings
| I rated (CC) | Load voltage | S1 | S2 | S3 | S4 |
| 300mA | 9-42V | - | - | - | - |
| 350mA | 9-42V | - | - | - | ON |
| 400mA | 9-42V | - | - | ON | - |
| 450mA | 9-42V | - | - | ON | ON |
| 500mA | 9-40V | - | ON | ON | - |
| 550mA | 9-36V | - | ON | ON | ON |
| 600mA | 9-32V | ON | - | ON | ON |
| 650mA | 9-30V | ON | ON | ON | - |
| 700mA | 9-28V | ON | ON | ON | ON |
【 Factory Setting 】
Adjust the corresponding current gear according to the order or customer demand.
【 Application 】
1. Please use this product in accordance with the specifications. Failure may occur if the product is used beyond the use conditions.
2. The product should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switches.
3. After the LED drive input is powered off, there will be residual voltage at the output end, which can be maintained for about 3 minutes.
Product Tags:
|
|
20W Motion Sensor Driver With PWM Dimming Function For Parking Area Images
|
